$415.00 $290.50
Shipping Container Racking Kit | 3-Tier Steel Shelving from BWContainers. In stock now, with flat-rate $200 delivery anywhere in Australia and typical delivery in 7 to 10 business days. Full specifications and dimensions are listed below.
Description
Single Bay 3-Tier Shipping Container Racking Kit
Maximise the storage capacity of your shipping container. This single bay, three-tier steel racking kit is purpose-built for standard ISO container interiors. It fits 10ft, 20ft, 30ft, and 40ft containers.
Each kit covers one side of the container. Order two kits to rack both sides. As a result, you double your usable shelf space without structural modifications or specialist tools.
All steel components are powder coated in blue and orange for a tough, scratch-resistant finish.
Racking Specifications
| Specification | Detail |
|---|---|
| Bay Width | 2250mm |
| End Frame Height | 2000mm (2m) |
| End Frame Width | 600mm |
| Shelf Tiers | 3 |
| Beams Per Shelf Level | 2 |
| Shelf Load Capacity | 550kg per shelf |
| Height Adjustment | 50mm increments |
| Steel Finish | Powder coated: blue and orange |
| Beam Retention | Safety clips included on all beams |
| Kit Coverage | Single side: one 2250mm bay |
Container Compatibility: Maximum Bays Per Side
This racking suits all standard ISO Series 1 freight containers. In addition, multiple kits run side-by-side in longer containers to fill the full wall length.
| Container Size | Max Bays Per Side | Kits Required (Both Sides) |
|---|---|---|
| 10ft | 1 | 2 |
| 20ft | 2 | 4 |
| 40ft | 5 | 10 |
Note: Racking mounts on both side walls. However, the end wall does not provide sufficient clearance for a full bay. Plan your layout accordingly before ordering.
Key Features
- Two pre-assembled end frames: no cutting, welding, or drilling required
- Beams slot directly into end frame uprights for rapid assembly
- Safety clips lock all beams and prevent accidental dislodgement under load
- Shelf heights adjust in 50mm increments to suit your stock profile
- Each shelf supports up to 550kg of evenly distributed weight
- All steel powder coated in blue and orange: corrosion and scratch resistant
- included per tier
Assembly Overview
The end frames arrive pre-assembled. Therefore, on-site setup is fast with no specialist tools required.
Step 1: Position the End Frames
Stand both end frames upright along the container side wall. Space them 2250mm apart.
Step 2: Slot in the Beams
Slot two beams per tier into the corresponding height holes on each end frame. Repeat for all three shelf levels.
Step 3: Attach Safety Clips
Clip the safety clips onto each beam end. As a result, the beams are locked and cannot dislodge under load.
Step
Place the onto each beam pair. The shelves sit flat and are ready to load immediately.
How Many Kits Do I Need?
This kit covers one side of the container with a single two kits to rack both sides. For longer containers, multiply by the number of bay positions required per side. Refer to the compatibility table above for a per-size kit count.
Suitable For
- Tool rooms and parts stores inside on-site storage containers
- Retail overflow and warehouse storage
- Construction site containers: keeps equipment and materials off the floor
- Agricultural storage: seeds, chemicals, and small equipment
- Workshop and garage containers
Related Products
Browse our full range of modified container accessories and fittings to complete your container storage setup.
