$600.00
20ft Shipping Container Racking Kit — Single Bay 3-Tier from BWContainers. In stock now, with flat-rate $200 delivery anywhere in Australia and typical delivery in 7 to 10 business days. Full specifications and dimensions are listed below.
Description
20ft Shipping Container Racking Kit — Single Bay 3-Tier
Convert your single bay, three-tier steel racking kit is purpose-built for standard 30ft and 40ft containers.
Each kit covers one side of the container. Order two kits to rack both sides. In addition, the end wall of a 20ft container provides enough clearance for racking. Therefore, pair this kit with our three-tier racking for rear of container to maximise every available wall.
All steel components are powder coated in blue and orange for a tough, scratch-resistant finish.
Racking Specifications
| Specification | Detail |
|---|---|
| Bay Width | 2250mm |
| End Frame Height | 2000mm (2m) |
| End Frame Width | 600mm |
| Shelf Tiers | 3 |
| Beams Per Shelf Level | 2 |
| Shelf Load Capacity | 550kg per shelf |
| Height Adjustment | 50mm increments |
| Steel Finish | Powder coated — blue and orange |
| Beam Retention | Safety clips included on all beams |
| Kit Coverage | Single side — one 2250mm bay |
Container Compatibility — Maximum Bays Per Side
This racking suits standard ISO Series 1 freight containers. Moreover, multiple kits run side-by-side in longer containers to cover the full wall length.
| Container Size | Max Bays Per Side | Kits Required (Both Sides) |
|---|---|---|
| 20ft | 2 | 4 |
| 30ft | 3 | 6 |
| 40ft | 5 | 10 |
Note: Racking mounts on both side walls and the end wall. However, the end wall requires our dedicated rear-of-container racking kit. Therefore, this side-wall kit is not designed for end wall installation.
Key Features
- Two pre-assembled end frames — no cutting, welding, or drilling required
- Beams slot directly into end frame uprights for rapid assembly
- Safety clips lock all beams and prevent dislodgement under load
- Shelf heights adjust in 50mm increments to suit your stock profile
- Each shelf supports up to 550kg of evenly distributed weight
- All steel powder coated in blue and orange — corrosion and scratch resistant
- included per tier
Assembly Overview
The end frames arrive pre-assembled. Therefore, on-site setup is fast with no specialist tools required.
Step 1 — Position the End Frames
Stand both end frames upright along the container side wall. Space them 2250mm apart.
Step 2 — Slot in the Beams
Slot two beams per tier into the corresponding height holes on each end frame. Furthermore, repeat for all three shelf levels.
Step 3 — Attach Safety Clips
Clip the safety clips onto each beam end. As a result, the beams are locked and cannot dislodge under load.
Step
Place the onto each beam pair. The shelves sit flat and are ready to load immediately.
How Many Kits Do I Need?
This kit covers one side of the container with a single two kits to start both side walls. Additionally, order up to four kits total to fill all two bay positions on both sides of a 20ft container. For complete coverage, add our rear-of-container racking kit for the end wall.
Suitable For
- On-site tool rooms and parts stores in 20ft site containers
- Retail and wholesale overflow storage
- Construction site containers — keeps equipment and materials off the floor
- Agricultural storage — seeds, chemicals, and small equipment
- Workshop and garage containers
Related Products
Browse our full range of container accessories and racking systems to complete your storage build.
